New models

Sherco unveils the 250 and 300 SE Xtrem 2027

For 2027, Sherco carries over its 250 and 300 SE Xtrem with a hard enduro-focused spec, reinforced protection and factory-style details.

Sherco unveils the 250 and 300 SE Xtrem 2027
For 2027, Sherco carries over its 250 and 300 SE Xtrem with a hard enduro-focused spec, reinforced protection and factory-style details.

For 2027, Sherco continues its Xtrem formula based on the 250 and 300 SE Factory. This limited series is clearly aimed at hard enduro, with a set of accessories and protections already fitted as standard to avoid having to build a dedicated bike from the standard version. The two models share the same overall logic, while the 300 gets a de-compressed cylinder head, presented as beneficial to low-rpm traction. The available sources also agree on immediate availability and a price position that varies depending on the market cited.

A limited series that is now well established

For 2027, Sherco is carrying over its pair of 250 and 300 SE Xtrem, two-stroke enduro bikes directly derived from the Factory range. This is no longer presented as a one-off novelty, but as a limited series that is now firmly established in the brand’s catalogue.

The aim remains the same: to offer a bike ready for the toughest terrain, with a specific spec package designed for hard enduro. The two models are described as close to Teo Kabakchiev’s official bike, though this should not be confused with a sporting homologation or a strict replica status.

The 2027 version is being announced early this year.

Source: Moto Verte, Enduro21

Sherco unveils the 250 and 300 SE Xtrem 2027Photo: Moto Verte. Full source at the end of the article.

What Sherco adds to the 250 and 300

The two Xtrem models share a very extensive list of specific equipment. Included are an Akrapovič silencer, a reinforced clutch, an Xtrem graphics kit identical to that of the official bikes, a reinforced SCAR handlebar, front and rear tow straps, a seat with enhanced grip and machined footpegs.

Protection is central to the build. Sherco fits, among other items, a black Xtrem bash plate or a long AXP bash plate depending on the source description, AXP radiator guards, a carbon front disc guard, a reinforced CNC rear disc guard, a reinforced AXP chain guide and clutch and ignition cover protections.

The spec also includes anodised quick axle pullers, a steel rear sprocket and blue anodised CNC parts. The sources agree on the presence of a blue CNC machined cylinder head, with reduced compression on the 300.

Source: Moto Verte, Enduro21

The confirmed difference between the 250 and 300

The two displacements are based on the same model platform and receive the bulk of the shared Xtrem-series parts. The explicitly confirmed technical distinction in the sources mainly concerns the 300.

On the 300, the de-compressed cylinder head is presented as beneficial to pull and traction at low revs. This change is not described as a shift in the model’s philosophy, but as a useful adjustment for hard enduro use.

Beyond this cylinder head and the displacement logic, no other substantive technical difference is given in the sources between the 250 and the 300.

Source: Moto Verte, Enduro21

Price, availability and positioning in the range

The sources do not give the same price or the same market, so they must be kept separate. Moto Verte quotes €12,999 for France, stating that the price remains unchanged from the previous model. Enduro21 cites a price of £10,899 in the UK for both Xtrem models, with immediate availability.

In the Sherco line-up as recalled by Enduro21, the Xtrem sits above the SE 250 Factory and SE 300 Factory, but below the limited EnduroGP versions capped at 140 units. This price gap mainly serves to illustrate the financial appeal of the Xtrem series compared with buying a Factory base bike and adding accessories separately.

The sources report around €3,500 worth of special parts for France and nearly £3,000 of special parts for the UK, without it being possible to unify them into a single figure. They must therefore be treated as reported ballpark figures, not as a single Sherco estimate.

Source: Moto Verte, Enduro21

What the rider or owner gains

For a hard enduro rider, the main appeal of the Xtrem formula is that the reinforced parts and protection are already fitted from the factory. This avoids having to build a specialised machine from a standard SE Factory.

The equipment listed by the sources targets impact resistance, traction, durability and ergonomics in difficult terrain. The carbon front disc guard, reinforced chain guide, specific bash plate, machined footpegs and steel rear sprocket all point in that direction.

However, the sources do not allow any further detail on the exact compatibility of these parts with other models, nor on road use, nor on universal fitting recommendations. The story must therefore remain focused on the configuration announced by Sherco for this limited series.

Source: Moto Verte, Enduro21

With the 250 and 300 SE Xtrem 2027, Sherco continues to establish a proposition clearly aimed at hard enduro, built on the Factory base but enhanced with a series of protection and performance parts fitted as standard. The logic is clear: offer a machine ready to ride in tough conditions, without forcing the buyer to assemble an equivalent preparation themselves.

Frequently asked questions

Are the Sherco 250 and 300 SE Xtrem 2027 factory bikes?

No. The sources describe them as limited series derived from the Factory models, with an appearance close to the official bikes, but not as factory bikes in the strict sense.

Does the 300 Xtrem 2027 have a specific engine setting?

Yes, the sources mention a de-compressed cylinder head on the 300, presented as beneficial to traction and low-rpm drive.

Are the prices identical across markets?

No. The cited sources give a price in euros for France and a price in pounds for the UK, which means they have to be treated separately without conversion.

Sources and dossier date

This dossier was prepared on 2026-11-21 from the sources listed below. Announcements, prices and specifications correspond to the stated dates and markets.

Frequently asked questions

Are the Sherco 250 and 300 SE Xtrem 2027 factory bikes?

No. The sources describe them as limited series derived from the Factory models, with an appearance close to the official bikes, but not as factory bikes in the strict sense.

Does the 300 Xtrem 2027 have a specific engine setting?

Yes, the sources mention a de-compressed cylinder head on the 300, presented as beneficial to traction and low-rpm drive.

Are the prices identical across markets?

No. The cited sources give a price in euros for France and a price in pounds for the UK, which means they have to be treated separately without conversion.

Sources

  1. Moto Verte
  2. Enduro21